Brake Fluid Tester 5 LED Pocket Car Vehicle Testing Tool

Model Number: MT300/LW-12-4 Brand Name: Eoutil Key Specifications/Special Features: Brake Fluid Tester 5 LED Pocket Car Vehicle Testing ToolReady for Brake Fluid TestUnscrew the brake fluid reservoir, and pull off the cap of the Brake fluid tester. Dip the test probes into the brake fluid up to the plastic rim of the device.To Check Fluid QualityPress the button for power on, green LED will light up. Insert the tester into reservoir for one second then the test result will be correctly indicated by LEDs. Repress the button for power off. The tester will automatically power off after about 15 seconds of inactivity.
Product Labelling Indication
●Green: Battery OK, i.e.: No water contained in the brake fluid.
●Yellow: Less than 1% of water content in brake fluid.
●Yellow/yellow: Approx. 2% of water content in brake fluid.
●Yellow/yellow/red: Approx.3% of water content in brake fluid. The brake fluid should be changed.
●Yellow/yellow/red/red: At least 4% of water content in brake fluid. The brake fluid must be changed urgently! Extreme danger!
●Battery (incl): One 1.5V , type AAA

Attention
●Replace battery if the green LED not light up any longer after you press power on button . Wash the test probe with tap water after every use.
●In case of skin contact with brake fluid, thoroughly wash the affected skin or clothing with water.
●Do not expose brake fluid to the atmosphere for a long time as the fluid is highly hygroscopic!